News:
October 06, 2022, 09:04:55 PM

Author Topic: Record slow down  (Read 1531 times)

0 Members and 1 Guest are viewing this topic.

Offline aragorn723

  • Hero Member
  • *****
  • Posts: 1001
Record slow down
« on: September 05, 2021, 05:50:15 AM »
Today I was listening to some records and noticed that they are slowing down.  The record player is a Uturn Orbit, and is 3 years old.  Is fixing this as simple as replacing the belt?

Dave

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 17406
Re: Record slow down
« Reply #1 on: September 05, 2021, 05:52:10 AM »
Why don't you ask U-turn?

Is the TT always off, or does it depend on where the needle is on the record?
Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline aragorn723

  • Hero Member
  • *****
  • Posts: 1001
Re: Record slow down
« Reply #2 on: September 05, 2021, 06:39:59 AM »
Only sometimes.  Its off when the stylus is closer to the end of a side.

Dave

Offline aragorn723

  • Hero Member
  • *****
  • Posts: 1001
Re: Record slow down
« Reply #3 on: September 05, 2021, 10:18:11 AM »
Was hoping someone could help on here.  I did send a note to Uturn but probably won't hear anything till Tuesday with the holiday coming.  Curious about your question though Paul, seems to imply it might not be the belt.  You would think belt tension is constant throughout the whole record.

Dave

Offline Deluk

  • Sr. Member
  • ****
  • Posts: 395
Re: Record slow down
« Reply #4 on: September 05, 2021, 12:27:42 PM »
Have you got a little strobe plate you can drop on the spindle? Useful to have far a $ or 2. You can then check the speed at any point on a record.
How is the bias set on your arm. String and weight? Magnetic? Might be a problem there.

Offline aragorn723

  • Hero Member
  • *****
  • Posts: 1001
Re: Record slow down
« Reply #5 on: September 05, 2021, 04:06:35 PM »
Never heard of a strobe plate, is there one you recommend?

As far as the cart, I followed their directions.  Mounted the cart, hooked up the wires, then checked the alignment.  After that, I set the tracking force to 1.75g iirc.  Afaik there is no separate bias setting on the Uturn.

Dave

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 17406
Re: Record slow down
« Reply #6 on: September 05, 2021, 04:08:21 PM »
You can just download and print one off the internet.
Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline Deluk

  • Sr. Member
  • ****
  • Posts: 395

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 17406
Re: Record slow down
« Reply #8 on: September 06, 2021, 05:45:51 AM »
Free!
Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline aragorn723

  • Hero Member
  • *****
  • Posts: 1001
Re: Record slow down
« Reply #9 on: September 06, 2021, 08:47:26 AM »
Thank you sir!

Dave

Offline aragorn723

  • Hero Member
  • *****
  • Posts: 1001
Re: Record slow down
« Reply #10 on: September 07, 2021, 10:23:39 AM »
Apparently the main bearing and spindle are bad.  Got them on order.

Dave

Offline Deluk

  • Sr. Member
  • ****
  • Posts: 395
Re: Record slow down
« Reply #11 on: September 08, 2021, 01:02:11 AM »
That must be very bad QC by Orbit unless there has never been any oil in the bearing. They normally last "forever" in normal use. I'd be politely asking them for a free replacement.

Offline Tubegopher

  • Full Member
  • ***
  • Posts: 82
  • Don Palmer
Re: Record slow down
« Reply #12 on: September 08, 2021, 08:08:15 AM »
I agree with DELUK. That is appalling... This is a turntable manufacturer and they send out product with bad bearing and spindle...  :(
300B amps with 6SJ7 in Triode mode, dc fil. volt. for 300Bs. BeePre with Bill Milosz built Eros Phono. Teres Turntable, Pete Riggle "12 inch Woody Tonearm" Grace F9  with Soundsmith ruby cantilever stylus.Cambridge Audio CD with MHDT Labs Orchid DAC Rega NAOS Spkrs, Atelier Rullit super tweeters

Offline aragorn723

  • Hero Member
  • *****
  • Posts: 1001
Re: Record slow down
« Reply #13 on: September 10, 2021, 06:12:28 AM »
Can't complain too much really, they charged me $10 for a new spindle and the main bearing since the table just went out of warranty.  Agreed though, probably was defective from the start.  My bicycle bearings last longer than that and have thousands of miles on them.  The Uturn has about 400 hours of use.

Dave

Offline Zimmer64

  • Full Member
  • ***
  • Posts: 209
    • Blog
Re: Record slow down
« Reply #14 on: September 13, 2021, 09:12:56 AM »
At these price points one would assume the manufacturer has to cut corners somewhere I suppose.
Nelson Pass F5 Turbo V2, Quickie (mod), S.E.X. 2.1, Tubes4hifi SP14, Dynaco VTA ST 70, Tubelab SSE, Vroemen Diva Superiore ER4, Jordan JX92S VTL, 47 labs 0647 CD, Aqvox DAC, Rowen Absolute pre / psu / power amps, BG Neo3 / Betsy / Eminence A15 open baffles