Voltage checks

Knightstick · 771

0 Members and 1 Guest are viewing this topic.

Offline Knightstick

  • Full Member
  • ***
    • Posts: 78
on: November 06, 2021, 01:12:35 PM
I completed my stereomour and it passed all the resistance checks. I've been testing the voltages and a few that were supposed to be zero are reading in the mili Volts. I'm wondering if these are within tolerance or should it read precisely 0. If they should I will post the voltages. Thanks in advance for any help.

Adam


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19319
Reply #1 on: November 06, 2021, 01:13:48 PM
With a kit that has voltages that go as high as 400V, seeing something like 50mV, which is 0.050V, is plenty close to 0V. 

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man