Resistance Readings ? [resolved]

El Tel · 735

0 Members and 1 Guest are viewing this topic.

Offline El Tel

  • Jr. Member
  • **
    • Posts: 45
on: November 06, 2021, 10:11:35 PM
Morning everyone

I have a question about resistance readings, specifically  the A5,A6,B5 and B6 which say in the manual should be between 0 and 100K. Mine are different on the A side to the B side, they read 47K on the B side and 67K on the A side.
I was wondering if this is normal. all the other checks are OK.
Thanks.
« Last Edit: November 07, 2021, 10:32:19 AM by Paul Birkeland »



Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19316
Reply #1 on: November 07, 2021, 05:31:14 AM
If you rotate the balance pot, those readings will move around.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Offline El Tel

  • Jr. Member
  • **
    • Posts: 45
Reply #2 on: November 07, 2021, 05:35:21 AM
Ah ha, that's OK then Paul ?



Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19316
Reply #3 on: November 07, 2021, 06:02:48 AM
Yeah, if they are close to the same when the balance pot is centered, everything is OK. 

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Offline El Tel

  • Jr. Member
  • **
    • Posts: 45
Reply #4 on: November 07, 2021, 08:49:45 AM
Yeah, if they are close to the same when the balance pot is centered, everything is OK.
Thanks Paul !!