Cleaning tube pins

Happy Ghost · 1356

0 Members and 1 Guest are viewing this topic.

Offline Happy Ghost

  • Full Member
  • ***
    • Posts: 155
on: April 18, 2022, 07:06:25 AM
Hello All,

Was wondering if it is safe to clean tube pins using the sanding drum (60 grit) which comes with Dremel? I was thinking of following that up with metal polish/Caig DeOxit.
Will the vibrations from the Dremel damage the tube insides?

Rgds,
 

Atul


Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9658
    • Bottlehead
Reply #1 on: April 18, 2022, 08:19:37 AM
60 grit? Yeow! You won't have any pins left. Maybe 400-600 grit. The best way is to chuck a cut off Q-tip in a Dremel and polish with something really gentle like Simichrome.

https://forum.bottlehead.com/index.php?topic=8888.0

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.


Offline Happy Ghost

  • Full Member
  • ***
    • Posts: 155
Reply #2 on: April 18, 2022, 08:30:20 AM
Cool.. thanks Doc!

Atul


Offline Mucker

  • Sr. Member
  • ****
    • Posts: 392
Reply #3 on: April 18, 2022, 05:22:29 PM
I just cut a small piece of 400 grit sandpaper, roll it up and do it by hand and do the inside and outside of the pins. Then coat with Deoxit using s small paint brush or qtip.

When I first started using tube amps and smallish tubes, I tried the dremel and quickly learned that is the wrong way to go. Yes tubes can be broke that way. Just hand doing it works 100% fine.




Offline Karl5150

  • Sr. Member
  • ****
    • Posts: 629
Reply #4 on: April 19, 2022, 09:10:17 AM
As detailed before I'm lazy and plunging the pins in and out of a "Magic Erasure" with a little twisting motion does a pretty good job on all but the most oxidized pins.
Karl

Karl
Downstairs: Planar3>PH-16>Stereomour II>OB Betsy+
Upstairs: RP1>Eros/CD5004>Seductor (2x Monoblocks)>FH3
Office: Modi Uber 2/Sirius>SEX2.1.1>µFonken FF85WK + DC160 subs
BR: FiiO M6>SEX3.0.1>ScanSpeak 10F + TangBand W6 (Mono)/DT770Pro
Garage: X12 streamer>Quicksand>Minimus 77


Offline Happy Ghost

  • Full Member
  • ***
    • Posts: 155
Reply #5 on: April 26, 2022, 04:23:06 AM
I've tried a few suggestions from this forum on cleaning tube pins.. But this is the best !!!

The best way is to chuck a cut off Q-tip in a Dremel and polish with something really gentle like Simichrome.
https://forum.bottlehead.com/index.php?topic=8888.0

Wow Doc!! ! It is like a night and day difference afterwards.. thank you so much (and to John 'Buddha') ...

Atul


Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9658
    • Bottlehead
Reply #6 on: April 26, 2022, 07:45:52 AM
You are welcome. That technique comes from a lot of years of trying a lot of different ways to clean pins. It's the only method I would use for critical equipment like studio gear. A little Deoxit application after the polishing will help the pins to stay clean a little longer.

Deoixit on all the connectors in your system once a year can be a real mindblower too. Sometimes it's like getting a new system. I use a bluetooth OBDII reader in my ambulance/race hauler that works with an Android car stereo and the Torque app. It kept cutting out yesterday morning on the way to work. A little Deoxit on the ODBII reader pins and it worked like new.

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.


Offline Happy Ghost

  • Full Member
  • ***
    • Posts: 155
Reply #7 on: April 26, 2022, 10:32:46 AM
You are welcome. That technique comes from a lot of years of trying a lot of different ways to clean pins. It's the only method I would use for critical equipment like studio gear. A little Deoxit application after the polishing will help the pins to stay clean a little longer.

Just a suggestion, Doc.. Perhaps all the manuals can be updated with a section listing these techniques for long term equipment care.. I am sure a lot of people would benefit from this (and similar hacks).. Something to think about  :)

Atul