News:
February 25, 2024, 01:28:08 PM

Author Topic: Need to identify version and get manual for used Crack + Speedball  (Read 1944 times)

0 Members and 1 Guest are viewing this topic.

Offline manicmidget

  • Jr. Member
  • **
  • Posts: 19
Re: Need to identify version and get manual for used Crack + Speedball
« Reply #30 on: November 29, 2022, 03:04:59 PM »
Yep, I am absolutely sure it's not. Might not be visible in the photos but I've checked from every angle.

Just in case the tube was damaged somehow by bad assembly, could you please let me know what each pin on the octal socket should be connected to?

Thanks so much for all your help!
« Last Edit: November 29, 2022, 03:07:27 PM by manicmidget »

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 19270
Re: Need to identify version and get manual for used Crack + Speedball
« Reply #31 on: November 30, 2022, 04:12:10 AM »
I would just replace that 6080 and see where that lands you.

That issue can't be caused by build issues, as the glowing heaters in both sides of the tube connect to the same pins, and it looks like one of those heaters has become disconnected.
Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline manicmidget

  • Jr. Member
  • **
  • Posts: 19
Re: Need to identify version and get manual for used Crack + Speedball
« Reply #32 on: November 30, 2022, 04:38:06 AM »
Gotcha, I'll report back once I get a new tube. Thanks again!