News:
September 28, 2023, 05:44:53 PM

Author Topic: Quick Assembly Question  (Read 79 times)

0 Members and 1 Guest are viewing this topic.

Offline Toys4Boys

  • Jr. Member
  • **
  • Posts: 43
Quick Assembly Question
« on: September 18, 2023, 08:56:08 AM »
My Eros 2 is due this week, been taking the time to get the materials, play with stains/dyes and read thru the manual. I feel like I have a pretty clear understanding of the steps, my question is regarding pg. 54 when soldering the 2" red solid core wire to "+275DC" on the PS board do you heat from the bottom and feed solder from the top?

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 18679
Re: Quick Assembly Question
« Reply #1 on: September 18, 2023, 09:12:49 AM »
I would not recommend doing that.  It's best to solder from the top side of that board and feed the solder in from the top as well.  These joints flow easily and quickly, so there isn't any need for special techniques.
Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline Toys4Boys

  • Jr. Member
  • **
  • Posts: 43
Re: Quick Assembly Question
« Reply #2 on: September 18, 2023, 09:39:23 AM »
Thank you Paul!