Eros Top Plate Refinish

Toys4Boys · 4007

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline Toys4Boys

  • Full Member
  • ***
    • Posts: 77
on: September 20, 2023, 05:29:30 AM
Just received my Eros 2, initial impressions very professionally packaged/prepped. The top plate is a straight grain finish, I would prefer a swirl pattern. Not a big deal but if it is something that I can do myself..... ;D


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19750
Reply #1 on: September 20, 2023, 05:40:37 AM
It takes a metal drill cup brush, a drill, and some patience.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline Toys4Boys

  • Full Member
  • ***
    • Posts: 77
Reply #2 on: September 20, 2023, 05:45:07 AM
Would a random orbit sander work or is the above the best method? Aside from patience how difficult would you say it is to get a nice looking finish?


Offline Mucker

  • Sr. Member
  • ****
    • Posts: 392
Reply #3 on: September 20, 2023, 05:48:26 AM


Offline Toys4Boys

  • Full Member
  • ***
    • Posts: 77
Reply #4 on: September 20, 2023, 05:52:53 AM
Nice! Thanks!


AG

  • Guest
Reply #5 on: September 20, 2023, 05:54:04 AM
Hi to all.
Green scotch brite could be less aggressive or a brass brush.

Just keep it cold to avoid deformation.

My2 cents.

Cheers from Fla.
Andre.


Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9658
    • Bottlehead
Reply #6 on: September 20, 2023, 08:06:24 AM
I think you are going to have a tough time hiding the existing 120 grit grain pattern with a wire brush. It would probably be worthwhile to sand it to a smooth 400 grit finish before attempting the jeweling.

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.

Offline Toys4Boys

  • Full Member
  • ***
    • Posts: 77
Reply #7 on: September 20, 2023, 02:49:21 PM
Yeah, I decided the existing finish would ake it more difficult, already started my build.  ;D


AG

  • Guest
Reply #8 on: September 20, 2023, 03:20:33 PM
Quote from: Toys4Boys on September 20, 2023, 02:49:21 PM
Yeah, I decided the existing finish would ake it more difficult, already started my build.  ;D

Keep us posted of your progress.

Cheers from Fla.
Andre.


Pages: 1   Go Up
« previous next »