Hello folks and fellow enthousiasts
Im starting my new Stereomour Kit, (not a first timer, but never encountered issues with the previous kits).
I attached the power transformer, output transformers, chokes and plugs and started with the first solder joins.
I need to measure the output of my power and the result seems really weird. Im in France so it should be around 220V and my reading is sometimes around 60/63V sometimes close to 0.
I think everything is in order in the wiring/soldering, there is almost nothing and there is no falty wiring, an electrician came to my house and checked that everything was ok with my sockets. So im wondering if my multimeter is ok (it reads the resistances fine) or the cable, or maybe the electrical plug on the chassis ?
Im a bit frustrated because i feel like a noob and i dont know what to do. So before buying a new multimeter i came for some advices.
Thanks in avance !
Xavier