Ping PB.regarding new taper Alps 10 k volume pot.

Thermioniclife · 655

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline Thermioniclife

  • Sr. Member
  • ****
    • Posts: 808
on: March 06, 2025, 06:43:27 AM
Hey PB  I noticed there is an addendum to the Moreplay upgrade kit, I had an ALPS tech spec taper chart alas I cant find it now. I would like to use a motorized volume pot. I have an ALPS 048g 10 kax2 motor pot would that be acceptable? It's from a failed/abandoned project.

Lee R.

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 20118
Reply #1 on: March 06, 2025, 06:48:53 AM
I suspect it would fit the board, you'll just have to figure out the remote sensor and power. 

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline Thermioniclife

  • Sr. Member
  • ****
    • Posts: 808
Reply #2 on: March 06, 2025, 07:40:38 AM
I can figure out the power and also the remote control, as I understand the upgrade board uses Dc I guess the question is what the custom taper that you are waiting for. Does that taper differ than the pot I  have?

Lee R.

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 20118
Reply #3 on: March 06, 2025, 10:47:08 AM
KA is a log pot, which is what's desired for the volume control.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline Thermioniclife

  • Sr. Member
  • ****
    • Posts: 808
Reply #4 on: March 06, 2025, 11:51:20 AM
Thanks PB.

Lee R.

Pages: 1   Go Up
« previous next »