BeePre 2 with upgrades

Yossihaimberg · 880

« previous next »
Pages: 1   Go Down

0 Members and 4 Guests are viewing this topic.

Offline Yossihaimberg

  • Jr. Member
  • **
    • Posts: 22
on: March 06, 2025, 09:31:32 AM
Just finished the build (including the Quiet and Output upgrades), and when testing, I get the following readings:

At the 31 and 33 terminals        229VDC

Between 4 and 45    11.5VDC
Between 4 and 60    0

Between 4 and Kreg    7.3VDC

Between 4 and 46   183VDC
Between 4 and 51   0

All the valves light up

Would you please help me troubleshoot?

Thank you,

Yossi


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 20118
Reply #1 on: March 06, 2025, 10:50:16 AM
Could you post some build photos? 

Was the preamp built and tested stock first?  Was the attenuator/C4S upgrade working on its own before the second upgrade was installed?

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline Yossihaimberg

  • Jr. Member
  • **
    • Posts: 22
Reply #2 on: March 06, 2025, 11:12:20 AM
Yes, it was working as intended


Offline Yossihaimberg

  • Jr. Member
  • **
    • Posts: 22
Reply #3 on: March 06, 2025, 11:30:04 AM
Please let me know if you need any more specific pictures.

Thanks!!!


Offline Yossihaimberg

  • Jr. Member
  • **
    • Posts: 22
Reply #4 on: March 07, 2025, 07:34:54 AM
Is it feasible to bring the unit to you? I'm in Portland, Oregon.


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 20118
Reply #5 on: March 08, 2025, 09:15:20 AM
Could you let me know the IA, OA, IB, OB, KregA, and KregB voltages on the 2nd upgrade board? 


Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Pages: 1   Go Up
« previous next »