Ok, so I admit I have very little experience with electronics. Forgive me if I ask stupid questions or don't understand the first time. I checked the working amp with my ohm meter at 25 and 11, and the meter flip flops between open and 0 ohms. I'm putting the positive lead of my meter on the connection at terminal 11, and the negative lead of my meter at terminal 25. When I rechecked the non working amp, it did the same thing as yesterday. I showed an ohm load, drifted down, drifted back up and then went to open. When I recheck it, it shows open, no ohm reading at all. I verified my leads are plugged into the ohm port on my meter and I even installed new batteries in the meter.
Pfenning
Paramour 1's with c4s and iron upgrade, Foreplay II, Seduction with c4s, Crack (stock) and Foreplay III (waiting to be built), DIY turntable with Rega RB250 arm with Incognito wiring, Oppo DVD, Pi Stage 4's and DIY subs