Missing resistors

jimiclow · 3697

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline jimiclow

  • Full Member
  • ***
    • Posts: 123
on: July 23, 2012, 04:46:05 PM
Hi Paul!
I'm almost done with my Stereomour build but I found out that the two 249K resistors are missing. I have already emailed Eileen and Doc but I have not received a reply.
I believe that those resistors are the grid leak resistors (?) How critical is the value of this resistor? I probably have some 220k metal films here that I can put in while waiting for Eileen to ship the resistor.
I've read that resistor value in C4S is critical than in resistor-biased circuit.
Thank you.

Bottlehead Stereomour with V-cap, Mundorf, Alps
SEX 2.1- Alps, Mundorf
Stock Crack
Reduction with Mundorf, Clarity caps
Schiit Asgard, Schiit Lyr
Technics SL1200mkII
Woo WA-6
Hoyt-Bedford speakers, Fostex T90A
LCD-2, HD600, ER4P, HF5, SR60i, DT990-600, DT770-32, HFI580

Offline InfernoSTi

  • Sr. Member
  • ****
    • Posts: 271
  • Positive emotions enhance our musical experiences.
Reply #1 on: July 23, 2012, 05:16:02 PM
Give them a call tomorrow....they will first class mail it the same day (typically).  I spoke with Paul on Friday and got a replacement part today (from Washington to Texas). 

Best,
John

John Kessel
Hawthorne Audio AMT K2 Reference Speakers
Paramount 300B w/MQ All Nickel Iron,  Mundorf S/G 5.5 uF,  and  Vcap Teflon .1 uF
Auralic Taurus Preamp/Auralic Vega DAC/Auralic Aries Streamer
and lots of room treatments!

Offline Paul Joppa

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 5833
Reply #2 on: July 23, 2012, 05:18:06 PM
No sweat. 249K is my compromise between 100K minimum and 500K maximum. It's not a critical precision value!

Paul Joppa

Offline jimiclow

  • Full Member
  • ***
    • Posts: 123
Reply #3 on: July 23, 2012, 05:47:29 PM
Thank you very much Paul!
I do have some 220k metal films. I got them from Mouser but they look like they're 1/8 watt (size-wise). Mouser insisted they're 1/2 watt.
I also ran out of the red hook-up wire although I cut wires to exact size. I have ordered some Teflon-covered wires though.

Hey Inferno, I'm in the Bastrop area. Where are you in Texas?

Bottlehead Stereomour with V-cap, Mundorf, Alps
SEX 2.1- Alps, Mundorf
Stock Crack
Reduction with Mundorf, Clarity caps
Schiit Asgard, Schiit Lyr
Technics SL1200mkII
Woo WA-6
Hoyt-Bedford speakers, Fostex T90A
LCD-2, HD600, ER4P, HF5, SR60i, DT990-600, DT770-32, HFI580

Offline InfernoSTi

  • Sr. Member
  • ****
    • Posts: 271
  • Positive emotions enhance our musical experiences.
Reply #4 on: July 24, 2012, 02:33:12 AM
Quote from: jimiclow on July 23, 2012, 05:47:29 PM
Hey Inferno, I'm in the Bastrop area. Where are you in Texas?

Jim (is it Jim?), I'm down in Schertz, just around the corner from you (at least by Texas standards).  Did you do OK with the fires?  I'm very sorry about that...it must have been a terrible time.  We sent crews from Schertz to help fight the fires (such as was possible).  John

John Kessel
Hawthorne Audio AMT K2 Reference Speakers
Paramount 300B w/MQ All Nickel Iron,  Mundorf S/G 5.5 uF,  and  Vcap Teflon .1 uF
Auralic Taurus Preamp/Auralic Vega DAC/Auralic Aries Streamer
and lots of room treatments!

Offline jimiclow

  • Full Member
  • ***
    • Posts: 123
Reply #5 on: July 24, 2012, 06:25:16 AM
Quote from: InfernoSTi on July 24, 2012, 02:33:12 AM
Quote from: jimiclow on July 23, 2012, 05:47:29 PM
Hey Inferno, I'm in the Bastrop area. Where are you in Texas?

Jim (is it Jim?), I'm down in Schertz, just around the corner from you (at least by Texas standards).  Did you do OK with the fires?  I'm very sorry about that...it must have been a terrible time.  We sent crews from Schertz to help fight the fires (such as was possible).  John

Thanks John. Yup, the fire was controlled just 2-3 miles from our house.

Bottlehead Stereomour with V-cap, Mundorf, Alps
SEX 2.1- Alps, Mundorf
Stock Crack
Reduction with Mundorf, Clarity caps
Schiit Asgard, Schiit Lyr
Technics SL1200mkII
Woo WA-6
Hoyt-Bedford speakers, Fostex T90A
LCD-2, HD600, ER4P, HF5, SR60i, DT990-600, DT770-32, HFI580

Offline KDog

  • Newbie
  • *
    • Posts: 4
Reply #6 on: November 04, 2013, 08:13:50 PM
Hi, I know this is an old thread but I'm missing the same two resistors.  They appear to have been swapped out for two 200K ohm resistors.  From the info in this thread I'm assuming that this value is ok but would like to have this verified.

Thanks,

KDog


Offline jimiclow

  • Full Member
  • ***
    • Posts: 123
Reply #7 on: November 05, 2013, 01:12:30 AM
Yes, you can use that. Just make sure to check the value with an ohmmeter.

Bottlehead Stereomour with V-cap, Mundorf, Alps
SEX 2.1- Alps, Mundorf
Stock Crack
Reduction with Mundorf, Clarity caps
Schiit Asgard, Schiit Lyr
Technics SL1200mkII
Woo WA-6
Hoyt-Bedford speakers, Fostex T90A
LCD-2, HD600, ER4P, HF5, SR60i, DT990-600, DT770-32, HFI580

Pages: 1   Go Up
« previous next »