Dynavector 10X5 Cartridge

KMokc · 2791

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline KMokc

  • Newbie
  • *
    • Posts: 6
on: December 04, 2012, 04:02:14 AM
New to the Bottlehead lifestyle. Just purchased a Seduction Phono Pre-Amp and would like to know if anyone has used a Dynavector 10X5 cartridge with it? If so any probs dislikes?

Thanks in advance for any help.

Kevin

Quick Silver Mini-Mites, Decware SE-84ZS,Blumenstein Orca's,Madisound Bk-12 w/Fostex Fe-126En,Wadia 121 Digital Computer,Mydac,Schitt Loki,Apple Mac Mini,Macbook Pro,VPI Traveler,Ortofon Bronze,Lounge MM Phono,Bottlehead Seduction,HSU Sub.

Offline debk

  • Sr. Member
  • ****
    • Posts: 657
Reply #1 on: December 04, 2012, 04:12:51 AM
The seduction product page says it will work with cartridges with an output of 2.5mV or higher. The 10x5 is a high output MC with an output of 2.5mV so it should work.

I have the same cartridge but and using it with the Eros, and am very happy with it

Debra
« Last Edit: December 04, 2012, 04:23:43 AM by debk »

Debra K

Eros 2Phono amp
BeePre2, Psvane ACME 300b
Kaiju, Linlai Elite  300b
Monamour 2a3 amps various tubes
Sota Sapphire, Pete Riggle Woody Tonearm, Kiseki Purpleheart Cartridge
Rega P6 Ania Pro cartridge
Roon Nucleus
MHDT Labs Orchid DAC
Jager speakers

4krow

  • Guest
Reply #2 on: December 04, 2012, 09:55:28 AM
For what it's worth, many years ago, I also owned this cartridge. Maybe it was just the synergy with my system, but I have NEVER heard better yet. It is a clear sound that I look for in cartridges. So many times, they sound a little fat to me.


Offline saildoctor

  • Full Member
  • ***
    • Posts: 140
Reply #3 on: December 04, 2012, 10:47:13 AM
FWIW I use a 2.8V dynavector cartridge with my Seduction and it does have plenty of gain for my FPIII/Paramount system.

Kerry Sherwin

45 Paramounts, 6SN7 Extended FPIII, OC3 regulated Seduction
Blumenstein Orca Deluxe / 2x Orca Subs
VPI Classic / ADC CD-100x

Pages: 1   Go Up
« previous next »