It's April, 40 degrees, and I can't start my build!

rif · 2485

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline rif

  • Full Member
  • ***
    • Posts: 151
on: April 03, 2013, 05:12:11 AM
I'm upset and venting, this weather just isn't right for the Northeast.

My garage is warmer at 50, but as soon as I open it to allow ventilation for soldering, it dips back down of course.

Ugh

-david

Offline earwaxxer

  • Hero Member
  • *****
    • Posts: 1336
Reply #1 on: April 03, 2013, 07:22:25 AM
Northeast - been there done that - no more - you can always solder in a coat and gloves - just sayin.

Eric
Emotiva XPA-2, Magnepan MMG (mod), Quickie (mod), JRiver, Wyrd4sound uLink, Schiit Gungnir, JPS Digital power cord, MIT power cord, JPS Labs ultraconductor wire throughout, HSU sub. powered by Crown.

Offline xcortes

  • Sr. Member
  • ****
    • Posts: 997
Reply #2 on: April 03, 2013, 07:29:14 AM
I've always, I mean always, soldered in closed places. I guess that explains some things.

Xavier Cortes

Offline Zimmer64

  • Full Member
  • ***
    • Posts: 210
    • Blog
Reply #3 on: April 03, 2013, 07:37:11 AM
I live in Switzerland. Weather well cooler than on an average year so far. I use a fan heater in the garage to stay warm.....

Best

Michael

Nelson Pass F5 Turbo V2, Quickie (mod), S.E.X. 2.1, Tubes4hifi SP14, Dynaco VTA ST 70, Tubelab SSE, Vroemen Diva Superiore ER4, Jordan JX92S VTL, 47 labs 0647 CD, Aqvox DAC, Rowen Absolute pre / psu / power amps, BG Neo3 / Betsy / Eminence A15 open baffles

Offline wullymc

  • Sr. Member
  • ****
    • Posts: 255
Reply #4 on: April 03, 2013, 05:33:45 PM
No excuse!

I live in Ottawa and completed my quickie over the weekend.  It was at most 5 degrees  and I did it in the garage for ventilation! 

just do it!!!  :)

Dave
Project RPM5.1 with 2M Bronze/Graham Slee Era Gold V/Quickie with PJCSS/Paramount 1.1 300B/Woden Valiant

ODAC/Crack/DT880 600ohm

Current Project:  Beepre!!!

Online Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9658
    • Bottlehead
Reply #5 on: April 03, 2013, 06:55:41 PM
You guys know that you can buy a bench top fume extractor for soldering, yes?

http://www.amazon.com/Parts-Express-Solder-Fume-Extractor/dp/B0072HZ1IA

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.

Offline proud indian

  • Full Member
  • ***
    • Posts: 159
Reply #6 on: April 03, 2013, 11:15:42 PM
Well, it is April and close to 40 degrees...........but I am talking of the heat. It is 40 degrees Celsius here !!!!!!!! Bloody hot. One mans meat another's poison :o :o


shreekant 8)

system 1. oppo, quickie,SEX 2.1 ( V cap), Decware DFR8 in ZOB cabs
System 2. Tascam cd200, Terra Dac,Zbox,Decware Zen amp(V cap) Lowther PM6A in Acousta horns.
Maple rack, Brass footers,Power conditioner, dedicated treated room, iso pads, plenty of tubes. All cables DIY.

Offline denti alligator

  • Hero Member
  • *****
    • Posts: 1156
Reply #7 on: April 04, 2013, 03:11:29 AM
I solder on the dining room table!

- Sam

Rega P3-24 (w/AT 150MLX) w/Groovetracer upgrades / Eros II / FLAC >J.River >DSD256 >Gustard X20 / Moreplay > Stereomour II / Klipsch Forte II w/Crites upgrades / C4S S.E.X. 2.0 +Nickel MQ Iron / Speedball Crack / Sennheiser HD600 w/Cardas cable

Offline proud indian

  • Full Member
  • ***
    • Posts: 159
Reply #8 on: April 04, 2013, 07:12:56 AM
So do I.

shreekant :)

system 1. oppo, quickie,SEX 2.1 ( V cap), Decware DFR8 in ZOB cabs
System 2. Tascam cd200, Terra Dac,Zbox,Decware Zen amp(V cap) Lowther PM6A in Acousta horns.
Maple rack, Brass footers,Power conditioner, dedicated treated room, iso pads, plenty of tubes. All cables DIY.

Pages: 1   Go Up
« previous next »