I Apologize For Not Doing This Myself-

Evan · 1394

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline Evan

  • Jr. Member
  • **
    • Posts: 39
on: November 21, 2013, 06:06:29 PM
Hi guys,
Could someone please measure the exact size of the aluminum top plates for the Crack and Stereomour for me? The width and length in millimeters would be ideal. I know they are 6"x10" and 10"x12", but I just wanted to confirm that is the actual exact dimension.

I'm currently on vacation with my parents and unexpectedly have time to use my father's wood working tools to cut some custom bases for my amps. I'm really sorry for asking someone else to do something I should have done myself, but I would appreciate any help. Thank you!!
Evan

Stereomour => SEOS Fusion 12 Tempest

Crack => Senn HD600

Offline Paul Joppa

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 5823
Reply #1 on: November 21, 2013, 06:18:14 PM
Those are the exact dimensions, within the accuracy of the laser cutter. 2.54cm per inch is a standard and completely exact, so you should be in good shape.

Paul Joppa

Offline Evan

  • Jr. Member
  • **
    • Posts: 39
Reply #2 on: November 22, 2013, 02:51:28 AM
Paul, thank you so much!!!

Stereomour => SEOS Fusion 12 Tempest

Crack => Senn HD600

Pages: 1   Go Up
« previous next »