E80CC with stock Crack?

Stanshall · 1130

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline Stanshall

  • Jr. Member
  • **
    • Posts: 24
on: March 25, 2014, 08:43:52 AM
Hello gents.

I'm running a TS5998 on Crack (no SB) and have just got an E80CC. First impressions are that it sounds brilliant (and a fair bit better than my ECC82) but I'm also conscious of the fact that it's obviously a bit more complex than a straight drop-in. Unfortunately, despite searching and reading a few threads, I don't quite understand the whys and the wherefores!

Long story short, how safe is it considered to run this one without SB?

Thanks.


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19369
Reply #1 on: March 25, 2014, 10:39:55 AM
What kind of voltages are you seeing in your amp with the E80CC?

 Specifically, terminals 1, 5, 7, and 9 will give a fair approximation of the operating point.

-PB

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline Stanshall

  • Jr. Member
  • **
    • Posts: 24
Reply #2 on: March 25, 2014, 10:50:56 AM
I've left my multimeter in work but I'll check tomorrow. Thanks, PB.


Offline Deluk

  • Sr. Member
  • ****
    • Posts: 438
Reply #3 on: March 29, 2014, 06:16:19 AM


Pages: 1   Go Up
« previous next »