Submissive and Paramounts

wylymon · 4658

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline wylymon

  • Jr. Member
  • **
    • Posts: 36
on: April 02, 2014, 03:26:33 PM
I have Paramounts and Klipschorns and would like to use a passive. Would the Submissive work? If anyone has ever used a passive with this combo of amp and speaker please respond. I also have an Eros.......would this also work?

 
« Last Edit: April 02, 2014, 04:09:17 PM by wylymon »

James Wyly

Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9550
    • Bottlehead
Reply #1 on: April 02, 2014, 04:40:28 PM
Yes, an Eros/Submissive/Paramount combo ought to work great with speakers that sensitive, as long as you have a decent signal level coming into the Eros from your phono cartridge.

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.

Offline wylymon

  • Jr. Member
  • **
    • Posts: 36
Reply #2 on: April 02, 2014, 05:27:31 PM
Thanks Doc for responding. I plan on using a Linn Adikt.....output is 6.5 mV.  So it sounds like a go. Nice thing about the
Submissive is that if I decide to do the Bee Pree in the future, I am only out a $100.00 bucks if I want to install it into the
pre-amp.
« Last Edit: April 02, 2014, 05:29:11 PM by wylymon »

James Wyly

Offline fullheadofnothing

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 1487
  • A noble spirit embiggens the smallest man
Reply #3 on: April 02, 2014, 05:34:42 PM
Just as a point of order, the BeeQuiet and Submissive are not the same. The BeeQuiet has all different resistors to match with the BeePre circuit.

Joshua Harris

I Write the Manuals That Make The Whole World Sing
Kit Packer Emeritus

Offline wylymon

  • Jr. Member
  • **
    • Posts: 36
Reply #4 on: April 02, 2014, 05:42:02 PM
Thanks for the headsup Joshua

James Wyly

Pages: 1   Go Up
« previous next »