News: Trouble logging in? Log in from the login page.
April 04, 2020, 07:56:43 AM

Author Topic: Errors in C4S 2.1 Manual on Kits Shipped before September 9, 2013  (Read 3753 times)

0 Members and 1 Guest are viewing this topic.

Offline boulos

  • Full Member
  • ***
  • Posts: 126
Errors in C4S 2.1 Manual on Kits Shipped before September 9, 2013
« on: September 09, 2013, 06:30:52 AM »
Hi,

I think I found 3 errors in the C4S 2.1 Manual:

- Page 12, paragraph 1: Either terminal 4 is 420V or terminal 5 is 210V.
  [I scratched my head a lot rereading terminal 5 and hoping for 420V.]
- Page 11, paragraph 5: The 4" twisted wire should be connected to OB and IB, not OA and IA. The picture is correct.
- Page 11, paragraph 2: 2.25" for the black wire is very tight. 2.5" was much easier to work with.

Hope this helps.
Boulos
« Last Edit: September 09, 2013, 08:59:30 AM by fullheadofnothing »

Offline fullheadofnothing

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1437
  • A noble spirit embiggens the smallest man
Re: Errors in C4S 2.1 Manual
« Reply #1 on: September 09, 2013, 08:58:41 AM »
Thanks Boulos!

I'll get these cleared up in the manual for future builders.
Joshua Harris

I Write the Manuals That Make The Whole World Sing
Kit Packer Emeritus