OT - oops

Doc B. · 1822

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9660
    • Bottlehead
on: December 06, 2014, 10:51:59 AM
Tipped my bike over this morning whilst trying to put it up on the swingarm stand. No big deal, just a slight crack on one fairing and a bruised knee. Seems pretty mundane compared to this oops:


Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.

Offline Mordicai

  • Full Member
  • ***
    • Posts: 174
Reply #1 on: December 06, 2014, 01:33:31 PM
Those swingarm stands have always filled me with fear for anything over 250cc.


Offline Ferrous Bueller

  • Jr. Member
  • **
    • Posts: 14
Reply #2 on: December 07, 2014, 12:28:50 PM
You did a great job with your restoration.  Congrats.

My bike has tip over protectors that I exercised once.  No damage to the bike and I just suffered a bruised ego.


Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9660
    • Bottlehead
Reply #3 on: December 07, 2014, 02:24:16 PM
Oh the bike has frame sliders, fork sliders and handlebar sliders, and flip up brake and clutch levers. But I think what really saved me from more damage was the two bags of blasting soda laying on the floor next to the bike. Made for a reasonably soft landing. I have the upper fairing vinyl wrap half finished as of this evening. That's the last bit of bodywork so I'm very close to completion.
« Last Edit: December 07, 2014, 02:27:08 PM by Doc B. »

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.

Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9660
    • Bottlehead
Reply #4 on: December 08, 2014, 07:41:34 PM
Got the upper fairing finished and mounted today. Just a few more things to check off...
« Last Edit: December 09, 2014, 08:56:31 AM by Doc B. »

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.

Offline JamieMcC

  • Hero Member
  • *****
    • Posts: 1167
Reply #5 on: December 08, 2014, 09:04:44 PM
Dan its good to see not to much damage has been done after all the work that went into the rebuilding.

On the subject of sliders I have a different use for the handle bar end type
« Last Edit: December 08, 2014, 09:26:06 PM by JamieMcC »

Shoot for the moon if you miss you will still be amongst the stars!

Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9660
    • Bottlehead
Reply #6 on: December 09, 2014, 05:08:09 AM
That is a very well protected set of headphones. The CF tubing is very cool.

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.

Pages: 1   Go Up
« previous next »