Solder station, first time build

wareaglefan · 8276

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline wareaglefan

  • Newbie
  • *
    • Posts: 1
on: March 23, 2015, 06:50:45 AM
Hey guys, I'm looking to pick up a crack/speedball kit this week, and will need a solder station. I saw this one- plenty of power it seems, but I'm wondering if it will make it through the build without failing- it's about half the price of most solder stations. Really trying to keep the cost down, so if this seems legitimate it would be a good deal for me.

I can't post links yet, but it's from circuit specialists- search for CSI-Station 75

Thanks guys!


Offline jake111

  • Full Member
  • ***
    • Posts: 98
Reply #1 on: March 23, 2015, 06:57:39 AM


Offline EarWorm

  • Full Member
  • ***
    • Posts: 82
Reply #2 on: March 23, 2015, 07:43:31 AM
really love this iron. 

Sony 8FC-69WA AM/FM Digimatic Flip Clock Radio Circa 1971. 
1962 RCA Victor 4 Volt Superheterodyne AM Radio With ear Jack & plastic ivory ear piece.   What?

Offline audiomaniac

  • Jr. Member
  • **
    • Posts: 47
  • No hill too steep, no ditch too deep!
Reply #3 on: March 24, 2015, 08:23:16 AM

John
------
Crack

Offline bobster

  • Full Member
  • ***
    • Posts: 93
Reply #4 on: March 24, 2015, 10:40:36 AM
which Hako model is it?

Bob Musson
Seduction (extended), Foreplay, Paramours, Klipsch Heresys, Orcas, Crack plus HD 600s
Lovin the Bottlehead sound in Maryland

Offline Chris65

  • Sr. Member
  • ****
    • Posts: 341
Reply #5 on: March 24, 2015, 12:05:36 PM
FX-888D


Offline bobster

  • Full Member
  • ***
    • Posts: 93
Reply #6 on: March 24, 2015, 04:12:08 PM
Thank you.

Bob Musson
Seduction (extended), Foreplay, Paramours, Klipsch Heresys, Orcas, Crack plus HD 600s
Lovin the Bottlehead sound in Maryland

Offline mcandmar

  • Hero Member
  • *****
    • Posts: 1599
  • Not all engineers are civil
Reply #7 on: March 24, 2015, 04:42:00 PM
I also have an 888D which is a great bit of kit, but not cheap this side of the pond.  Be careful where you buy it from as there are a lot of fakes out there, especially on eBay.

M.McCandless

Offline Strikkflypilot

  • Sr. Member
  • ****
    • Posts: 459
  • Shellac fiddler
Reply #8 on: May 05, 2015, 10:23:31 AM
Doesn't look bad.
I wish I hadn't built my Crack with a 1/4 inch chisel Iron, soldering the Mainline was a whole lot easier to make good looking with my soldering station, which is a Xytronic LF-3000 btw.
Sure made it work and then some but the Speedball was a little tight:)

More important, though is practicing a bit before the real soldering starts.
And look at the PACE training videos on Youtube.
(Too many videos out there with guys loving to say the phrase 'Just need to apply a little bit more solder in there' making blobs and a mess:))

Home system:
Sources: Ibasso DX90, Google Chromecast Audio optical out
DAC: Schiit Gumby
Amp: Bottlehead Mainline
http://bottlehead.com/smf/index.php?topic=7463.0
Phones: HD800S

Office:
Sources: Iphone/ Ipod
DAC: Dragonfly Red+Jtrbug
Amp: Crack/Speedball heavily modded
Phones: HD580,HD600 grilles

Offline mkane

  • Full Member
  • ***
    • Posts: 195
Reply #9 on: May 06, 2015, 04:12:11 AM
Quote from: Chris65 on March 24, 2015, 12:05:36 PM
FX-888D

 If I remember correctly ours was $77


Offline catfishstevens

  • Jr. Member
  • **
    • Posts: 11
Reply #10 on: May 20, 2015, 09:38:31 PM
IMO the Hakko is absolutely worth every cent, but yeah get it from a reputable source.  I think I paid $100ish for mine from Amazon and it came with a bunch of tips and cleaning wire.   Think of it as a long term investment because they last forever and the difference between a Hakko and a cheapo is incredible.  There are of course some other great (and expensive) brands out there but for Hakko 888 is a classic.

For tips, I pretty much exclusively use 1-3mm chisel tips or the knife point tip for through hole work.  I do not recommend the pointed tips for through hole work, the surface area is too small to effectively transfer heat.  Really, don't ever use them IMO but some people like them for SMD.  For that I prefer the knife point, but I don't think any BH products use SMD anyway.


Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9657
    • Bottlehead
Reply #11 on: May 21, 2015, 06:30:20 AM
Actually the 936 is the classic. The 888 is the current model. A used 936 is a great value. I usually have some oddball station for my own use (Hexacon for years until someone used it as a prybar, Ersa 2000 now) but a 936 always ends up being the go-to iron in the lab.

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.

Offline catfishstevens

  • Jr. Member
  • **
    • Posts: 11
Reply #12 on: May 21, 2015, 02:20:43 PM
That's a great point, a used 936 would be an excellent iron.


Pages: 1   Go Up
« previous next »