Bottlehead shipping to Germany

daro · 3294

« previous next »
Pages: 1   Go Down

0 Members and 2 Guests are viewing this topic.

Offline daro

  • Newbie
  • *
    • Posts: 2
on: March 29, 2015, 11:12:59 PM
I ordered my first Bottlehead Kit, the Crack OTL a few weeks ago and
recently I heard about an issue where a customer bought an electronical device (outside of Europe)
that the customs in Germany didnt allow him to take with him.

They said "that certain product is unsafe as it lacks the 'CE' sign"
(en.wikipedia.org/wiki/CE_marking)

So now my question is, have there been any problems with Bottlehead products shipping to Europe, or does the CE sign even matter
as the Crack OTL is after all just a kit that the owner has to build by himself?

Thanks



Offline JamieMcC

  • Hero Member
  • *****
    • Posts: 1167
Reply #1 on: March 29, 2015, 11:32:59 PM
I suspect that as you are essentially buying a box of parts and not a assembled item it should not be a problem.

Shoot for the moon if you miss you will still be amongst the stars!

Offline grausch

  • Full Member
  • ***
    • Posts: 126
Reply #2 on: March 30, 2015, 02:07:32 AM
I ordered a Crack, Stereomour and most recently the Speedball. All shipped to Luxembourg within the last 18 months without an issue.

Gunter Rausch

Modded Bottlehead Crack
Modded Stereomour with Two-tone Orcas

Offline daro

  • Newbie
  • *
    • Posts: 2
Reply #3 on: March 30, 2015, 04:25:17 AM
That sounds good.
Thanks for the quick responses !


Offline Zimmer64

  • Full Member
  • ***
    • Posts: 210
    • Blog
Reply #4 on: March 30, 2015, 04:40:37 AM
To Switzerland was also no problem. I bought already two BH kits as well as several others.

Enjoy!

Michael

Nelson Pass F5 Turbo V2, Quickie (mod), S.E.X. 2.1, Tubes4hifi SP14, Dynaco VTA ST 70, Tubelab SSE, Vroemen Diva Superiore ER4, Jordan JX92S VTL, 47 labs 0647 CD, Aqvox DAC, Rowen Absolute pre / psu / power amps, BG Neo3 / Betsy / Eminence A15 open baffles

Offline mcandmar

  • Hero Member
  • *****
    • Posts: 1599
  • Not all engineers are civil
Reply #5 on: March 30, 2015, 05:22:56 AM
I believe it is exempt from all type approval because its a kit, if Bottlehead assembled and sold it as an amplifier then it would be subject a whole bunch of regulations for each country.

Only thing to keep in mind is customs charges, can be rather expensive in certain countrys.

M.McCandless

Offline orson

  • Jr. Member
  • **
    • Posts: 43
Reply #6 on: March 30, 2015, 12:44:01 PM
Has no problems with German customs.
Has to pay VAT as ususal - thats it ( besides of 2 hours waiting time).

Mac with Audirvana | Audio GD Reference 5.32 | Bottlehead Crack | Beyerdynamic T1

Pages: 1   Go Up
« previous next »