News: Not receiving your account activation email? Contact [email protected]
November 26, 2020, 08:54:17 PM

Author Topic: Pop on amp shutdown  (Read 2923 times)

0 Members and 1 Guest are viewing this topic.

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 13884
Re: Pop on amp shutdown
« Reply #15 on: May 27, 2015, 08:08:27 AM »
You could try putting a 220pF cap from grid to ground on each channel of the Smash.  This is probably easiest to do at the volume pot, by adding one cap on each level between the black wire and the adjacent red/white wire. 
Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man