crack top plate cad file

dusk · 1847

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline dusk

  • Jr. Member
  • **
    • Posts: 19
on: August 06, 2015, 07:42:22 AM
I wanted to punch out a new aluminum plate for the crack, and then laser etch a pattern onto it.. is there a cad file or other vector file around to work with?  Is this ok, Doc B?


Offline Grainger49

  • Hero Member
  • *****
    • Posts: 7175
Reply #1 on: August 06, 2015, 08:09:16 AM
Bottlehead will not release the drawings for their tops.  I don't remember if the last request was for a Crack, but the answer is get your top plate and take careful measurements.


Offline dusk

  • Jr. Member
  • **
    • Posts: 19
Reply #2 on: August 06, 2015, 09:18:28 AM
Quote from: Grainger49 on August 06, 2015, 08:09:16 AM
Bottlehead will not release the drawings for their tops.  I don't remember if the last request was for a Crack, but the answer is get your top plate and take careful measurements.

what about buying a new top plate from bottlehead?


Offline Nathan

  • Full Member
  • ***
    • Posts: 204
Reply #3 on: August 06, 2015, 01:32:49 PM
You can purchase a new top plate-

Crack/Speedball, SEX 2.1/C4S, Bryston BHA-1

Sennheiser HD600/Cardas cable, Beyerdynamic T1 2nd Gen, Hifimam HE560/Hifiman balanced cable

Pages: 1   Go Up
« previous next »