Newbie getting into DIY Audio

longinc · 2944

0 Members and 1 Guest are viewing this topic.

Offline longinc

  • Newbie
  • *
    • Posts: 3
on: March 26, 2017, 08:20:27 PM
Hi There,

I am a newbie getting into DIY tube amplification, and would appreciate a book and/or website recommendation where I can get a good primer on electronics circuit theory & tube amp design & practical tips/tricks (e.g. like getting good at soldering). I have very little electronics knowledge, and zero DIY electronics experience. I am hoping to get sufficient knowledge before embarking on a BeePree/Kaiju build. If this topic has been covered previously, apologies & please point me in the right direction. Thank you!

Andrew

Andrew


Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9658
    • Bottlehead
Reply #1 on: March 27, 2017, 05:43:35 AM

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.


Offline fullheadofnothing

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 1487
  • A noble spirit embiggens the smallest man
Reply #2 on: March 27, 2017, 06:11:53 AM
Build a simpler kit, like a Quickie or Crack, before attempting something big and complicated. Quickie would be the easiest, and you could use it with your Kaiju while building the BeePre. Or you could sell a well built Crack for a profit over the kit price.

Joshua Harris

I Write the Manuals That Make The Whole World Sing
Kit Packer Emeritus


Offline kgoss

  • Sr. Member
  • ****
    • Posts: 329
Reply #3 on: March 27, 2017, 06:38:08 AM
Also watch the Bottlehead how to videos in the "How to videos" forum on this site.  They show you how to avoid common mistakes when building the kits.  There are a number of soldering videos on the web too. 

Ken Goss


Offline Zimmer64

  • Full Member
  • ***
    • Posts: 210
    • Blog
Reply #4 on: March 27, 2017, 08:40:14 AM

Nelson Pass F5 Turbo V2, Quickie (mod), S.E.X. 2.1, Tubes4hifi SP14, Dynaco VTA ST 70, Tubelab SSE, Vroemen Diva Superiore ER4, Jordan JX92S VTL, 47 labs 0647 CD, Aqvox DAC, Rowen Absolute pre / psu / power amps, BG Neo3 / Betsy / Eminence A15 open baffles


Offline longinc

  • Newbie
  • *
    • Posts: 3
Reply #5 on: March 27, 2017, 09:45:00 AM
Thanks Everyone for your quick and helpful responses!!

Andrew

Andrew


Offline EricS

  • Full Member
  • ***
    • Posts: 233
    • My DIY Home Theater
Reply #6 on: September 01, 2017, 03:29:29 PM
I always seem to be late to the party, but the Navy Electrical Engineering Training Series is an EXCELLENT read.

https://maritime.org/doc/neets/

Each module is its own several hundred page pdf.  VERY worth while reads for the tube noob!

Eric

Haven't electrocuted myself yet...   
There are ALWAYS User Serviceable Parts Inside!


Offline Sugar Man

  • Full Member
  • ***
    • Posts: 127
    • The Last Honest Lawyer
Reply #7 on: September 05, 2017, 05:34:10 AM
Build a simpler kit, like a Quickie or Crack, before attempting something big and complicated. Quickie would be the easiest, and you could use it with your Kaiju while building the BeePre.

+1.  A Quickie is a great first build as it is simple, and the voltages are small which will provide a safe environment for your first live testing.  If you add a Quicksand, you will get experience and a really cool battery-operated stereo.  If all goes well, you'll have more confidence to tackle the Beast!

Mike "Stein" Ayotte

Current Gear:

Elekit TU-8600 300B w/Lundahl Trannies
Herron Audio VTPH-2a
Rega RP8 w/ Apheta 2
Bluesound Node 2i
Audio Note E Speaker Kit-04 w/ AlNiCo drivers

Stereomour II w/ Jupiters
Eros w/ Mundorf Silver Oils
Blumenstein Orcas & Subs