Continuity Question

Jimb0 · 8968

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline Jimb0

  • Sr. Member
  • ****
    • Posts: 294
on: March 30, 2020, 03:09:11 PM
Tested the continuity but I'm getting 0.001 for all three pins
I set my voltometer to AC/2v like in the picture

Is this okay?


Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9657
    • Bottlehead
Reply #1 on: March 30, 2020, 04:14:49 PM
That's the wrong end of the knob you're looking at. It's pointing to the continuity setting in the ohms scales at about 7:30 rather than the 2VAC scale at 1:30. If you don't have a continuity beeper on your meter you can just use your lowest ohms scale.

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.

Offline Jimb0

  • Sr. Member
  • ****
    • Posts: 294
Reply #2 on: March 31, 2020, 08:44:26 AM
perfect thanks Doc! I got 0.3 ohms for each reading


Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9657
    • Bottlehead
Reply #3 on: March 31, 2020, 09:40:33 AM
Sounds like you're good to go.

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.

Pages: 1   Go Up
« previous next »