One last Voltage question

ryburdman · 6388

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline ryburdman

  • Jr. Member
  • **
    • Posts: 35
on: February 25, 2021, 10:27:51 AM
One last question again thanks for all the help.
My voltage reading on 44 and 45 are also different than the manual
44 80v
45 80v
Looking through the forum this seems to be fairly common but its enough different from the manual I thought I should ask. All 4 LED's light up and everything else tests in limits

Ryan Burdick
Reduction/Crack/Aune X1s/RebelAmp/6xx/Mangrid Tea/Tin t2

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19750
Reply #1 on: February 25, 2021, 12:15:00 PM
I would let the tubes run in for 50 hours and check that again. Those will likely lower with some burn in time.

-PB

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline niceguyjml

  • Newbie
  • *
    • Posts: 2
Reply #2 on: March 21, 2021, 08:13:38 AM
"Run the Amp" like leave it turned on but no RCA in/out put?


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19750
Reply #3 on: March 21, 2021, 09:10:37 AM
You can have the cables hooked up.  This is generally a good idea with the inputs at least.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Pages: 1   Go Up
« previous next »