Startup Sound?

Herbertk · 2575

0 Members and 1 Guest are viewing this topic.

Offline Herbertk

  • Jr. Member
  • **
    • Posts: 29
on: March 16, 2022, 08:11:48 AM
So I have been playing around with different tubes :)

Might be forming a slight obsession evidence attached haha... (tubes for SMII and Moreplay)

anyhow my question is this when I used a different set of tubes there was a different sound when you switch the amp on a slight crackle I have not checked which tube exactly but I wondered if this is normal and even more interested to find out what it is I am hearing ?



Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19744
Reply #1 on: March 16, 2022, 08:29:29 AM
Some noise during warmup is completely normal.  If the noise persists, then it may help to do a bit of debugging to find the source.

-PB

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Offline Herbertk

  • Jr. Member
  • **
    • Posts: 29
Reply #2 on: March 16, 2022, 08:39:59 AM
Thanks ill try and isolate it and see if it is a specific tube / tubes doing it...

It is only during warmup after it sounds great.
« Last Edit: March 16, 2022, 08:44:13 AM by Herbertk »



Offline ccmccull

  • Full Member
  • ***
    • Posts: 101
Reply #3 on: March 16, 2022, 09:05:12 AM
Not a steromour, but I was also surprised to hear this startup noise on my s.e.x. amp when listening through headphones. It's like a glassy tinkly crackly sound that lasts for just a few seconds. It's rather pleasurable actually!

Colin. Insta @act4audio
{Ortofon 2m Blue > U-Turn Orbit > Eros 2} & {Roon Ropieee RPi4 > hifiberry-digi2-pro > ANK DAC 2.1} > Moreplay > {SVS_SB-1000 (x3)} & {diy kegger design kt88 SET} > Magnepan .7


Offline 2wo

  • Hero Member
  • *****
    • Posts: 1261
  • Test
Reply #4 on: March 16, 2022, 05:42:59 PM
 Figure you take a precision device, from room temperature to too hot to handle and hit it with high voltage,I little snap, cracke and pop should come as no surprise...John

John S.