Cathod bypass capacitor, and resistor.

ToneDeaf · 4363

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline ToneDeaf

  • Jr. Member
  • **
    • Posts: 49
on: October 10, 2023, 10:09:02 AM
   This is the 150uf electrolytic that is in parallel with a 619 ohm ?
 Can this capacitor value be upped? I have been looking, but can't find a Nichicon fine gold in 150uf's. Can it be replaces with a 220uf cap?

     Is the resistor in parallel with it. It's 619 ohms. Is it a metal film or a carbon film ?
 
     Thank you all.


Offline Paul Joppa

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 5830
Reply #1 on: October 10, 2023, 12:09:06 PM
Yes a larger capacitance is no problem.

Paul Joppa

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19744
Reply #2 on: October 10, 2023, 12:29:17 PM
Quote from: ToneDeaf on October 10, 2023, 10:09:02 AM
Is it a metal film or a carbon film ?
 
Metal film.  It is mostly out of the signal path since the capacitor is across it.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline Tom-s

  • Sr. Member
  • ****
    • Posts: 497
Reply #3 on: October 11, 2023, 09:04:09 AM
I've replaced the cathode resistor bypass caps with Jupiter's wet electrolytics 250uf with good results.


Pages: 1   Go Up
« previous next »