Left channel out (still causing trouble!)

denti alligator · 12313

« previous next »
Pages: 1 2 3 4   Go Down

0 Members and 1 Guest are viewing this topic.

Offline denti alligator

  • Hero Member
  • *****
    • Posts: 1156
Reply #45 on: March 13, 2015, 01:13:51 PM
Well, I re-flowed that join at least 5 times, so I doubt it was a bad joint. And just loosening and re-tightening wouldn't explain fixing it if it were damaged form heat.

Oh well, I'm happy it appears to be working.

- Sam

Rega P3-24 (w/AT 150MLX) w/Groovetracer upgrades / Eros II / FLAC >J.River >DSD256 >Gustard X20 / Moreplay > Stereomour II / Klipsch Forte II w/Crites upgrades / C4S S.E.X. 2.0 +Nickel MQ Iron / Speedball Crack / Sennheiser HD600 w/Cardas cable

Offline mkane

  • Full Member
  • ***
    • Posts: 195
Reply #46 on: March 13, 2015, 02:15:36 PM


Offline denti alligator

  • Hero Member
  • *****
    • Posts: 1156
Reply #47 on: March 13, 2015, 02:41:29 PM
Well, so far it seems to have been the culprit. Glad to have it resolved. New speaker location is giving me a whole new sound. It's amazing how much difference speaker orientation can make!

- Sam

Rega P3-24 (w/AT 150MLX) w/Groovetracer upgrades / Eros II / FLAC >J.River >DSD256 >Gustard X20 / Moreplay > Stereomour II / Klipsch Forte II w/Crites upgrades / C4S S.E.X. 2.0 +Nickel MQ Iron / Speedball Crack / Sennheiser HD600 w/Cardas cable

Offline denti alligator

  • Hero Member
  • *****
    • Posts: 1156
Reply #48 on: March 15, 2015, 04:08:12 AM
After a day everything sounding fine I woke up this morning and the left channel was barely audible. What's strange is that I didn't touch the jack.

So I fiddled with the jack a bit, and tightened it slightly some more (it was already very very tight). Now it's OK again.

What's weird about all this is that if it is this mechanical problem of a lack of tight connection, why was I getting decent sound and only later poor sound?

At this point I don't expect it to last another 24 hours...

- Sam

Rega P3-24 (w/AT 150MLX) w/Groovetracer upgrades / Eros II / FLAC >J.River >DSD256 >Gustard X20 / Moreplay > Stereomour II / Klipsch Forte II w/Crites upgrades / C4S S.E.X. 2.0 +Nickel MQ Iron / Speedball Crack / Sennheiser HD600 w/Cardas cable

Offline aragorn723

  • Hero Member
  • *****
    • Posts: 1031
Reply #49 on: March 15, 2015, 10:21:54 AM
How about using some glue on the threads to hold the jack tight (or between the screw an nut).  Nothing too crazy, maybe hot glue or some gorilla glue?

Dave


Pages: 1 2 3 4   Go Up
« previous next »