Help. Can’t get past the power supply test. [mostly resolved]

last lemming · 3601

0 Members and 1 Guest are viewing this topic.

Deke609

  • Guest
Reply #15 on: February 23, 2021, 03:19:38 AM
The right leg of the bottom capacitor could use some more solder.

cheers, Derek



Offline last lemming

  • Jr. Member
  • **
    • Posts: 35
Reply #16 on: February 23, 2021, 09:25:52 AM
Would that not being fully soldered cause my issue?



Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19745
Reply #17 on: February 23, 2021, 09:49:38 AM
Yes, if the cap on the output of the regulator isn't well soldered, the regulator may not function properly.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Offline last lemming

  • Jr. Member
  • **
    • Posts: 35
Reply #18 on: February 23, 2021, 01:21:58 PM
Ok reflowed that one capacitor and triple checked the others, but no change.

At this point I’m not sure what I’m supposed to do.



Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19745
Reply #19 on: February 23, 2021, 01:24:10 PM
If you'd like, you can mail me the board and I'll get it working for you.  My e-mail is pb(at)bottlehead(dot)com. 

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Offline last lemming

  • Jr. Member
  • **
    • Posts: 35
Reply #20 on: February 23, 2021, 01:39:50 PM
I may have too. Thanks.



Offline last lemming

  • Jr. Member
  • **
    • Posts: 35
Reply #21 on: February 23, 2021, 02:08:51 PM
Ok email sent



Offline last lemming

  • Jr. Member
  • **
    • Posts: 35
Paul,

I just think I got your email right, but if you don’t see my email please let me know.

Thanks again for your offer of assistance.



Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19745
I received your e-mail and replied with my mailing address.  If you haven't seen that, it's probably in your spam folder.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Offline last lemming

  • Jr. Member
  • **
    • Posts: 35
Ok. I’m not seeing it. I’ll send again.

Thanks.



Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19745
I replied again.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Offline last lemming

  • Jr. Member
  • **
    • Posts: 35
Paul,

Im not sure what's going on with getting your email, but I sent you a new one from my office.

Sorry for the inconvenience. 

Greg




Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19745
Third reply sent.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19745
This issue turned out to be a meter issue.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man