Voltage Off, Before Output Wiring [resolved]

rsmiii · 2325

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline rsmiii

  • Jr. Member
  • **
    • Posts: 26
on: November 24, 2022, 06:40:56 AM
Basic BeePre 2.0 — Page 55 of the build manual:

Voltage check, 14U & 6 = 95VDC
Voltage check, 14U & 16 = 95VDC

Target measurement "should be close to 100VDC."
Please, is this 5VDC discrepancy concerning?
All other resistance and voltage checks on the build, to this point, have been right on target.
« Last Edit: November 24, 2022, 08:46:40 AM by Paul Birkeland »


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19745
Reply #1 on: November 24, 2022, 06:57:44 AM
No, that 5V discrepancy means that your tubes have higher emission than the ones I used when we wrote the manual ;)

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline rsmiii

  • Jr. Member
  • **
    • Posts: 26
Reply #2 on: November 24, 2022, 08:44:42 AM
Thank you for the reassurance!
All well – My BeePre 2.0 is up and working great with the Kaiju right now.


Pages: 1   Go Up
« previous next »