BeePre 2 on/ off switch upgrade

[blackharp]

Anyone know where I can find a fancier on/ off switch for the Bee Pre 2? Perhaps in brass or gold?

[Paul Birkeland]

This is one I have used before, though you may need to slightly file the hole for it to not fit too snugly.
https://www.mouser.com/ProductDetail/Marquardt-Switches/1683.1101?qs=4EOvy6wCNnuI4PiOeAczdg%3D%3D

I'm not sure I have ever seen a brass rocker switch.

[Jay]

like this?
https://www.stewmac.com/electronics/components-and-parts/switches/switchcraft-toggle-switches/?utm_source=google&utm_medium=shopping&utm_campaign=2023-02-gp&gclid=EAIaIQobChMIrZKY4pyV_QIVgRvUAR0q4AiLEAQYAiABEgJxh_D_BwE

[blackharp]

like this?
https://www.stewmac.com/electronics/components-and-parts/switches/switchcraft-toggle-switches/?utm_source=google&utm_medium=shopping&utm_campaign=2023-02-gp&gclid=EAIaIQobChMIrZKY4pyV_QIVgRvUAR0q4AiLEAQYAiABEgJxh_D_BwE

Not bad! It would match my Les Paul..

[Paul Birkeland]

You know what they say about putting the round peg in the rectangular hole...

[blackharp]

You know what they say about putting the round peg in the rectangular hole...

That I could easily craft a small, rectangular brass plate with a round hole in it?

[Paul Birkeland]

I would use some adhesive as well to keep things from rotating.  My experience with switches like that is that they like to back themselves out and get loose. 

[mpeg2]

Careful with that Switchcraft switch - try to find some specs on it. If I'm not mistaken, it is meant to switch electric guitar pickup level signals - not for switching AC power on/off.

Rich