BeePre 2 on/ off switch upgrade

blackharp · 20843

0 Members and 1 Guest are viewing this topic.

Offline blackharp

  • Jr. Member
  • **
    • Posts: 44
on: January 24, 2023, 10:48:29 AM
Anyone know where I can find a fancier on/ off switch for the Bee Pre 2? Perhaps in brass or gold?
« Last Edit: January 24, 2023, 11:00:27 AM by blackharp »



Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19823
Reply #1 on: January 24, 2023, 10:54:28 AM
This is one I have used before, though you may need to slightly file the hole for it to not fit too snugly.
https://www.mouser.com/ProductDetail/Marquardt-Switches/1683.1101?qs=4EOvy6wCNnuI4PiOeAczdg%3D%3D

I'm not sure I have ever seen a brass rocker switch.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man




Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19823
Reply #4 on: February 14, 2023, 10:56:39 AM
You know what they say about putting the round peg in the rectangular hole...

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Offline blackharp

  • Jr. Member
  • **
    • Posts: 44
Reply #5 on: February 14, 2023, 10:57:53 AM
You know what they say about putting the round peg in the rectangular hole...
That I could easily craft a small, rectangular brass plate with a round hole in it?



Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19823
Reply #6 on: February 14, 2023, 11:03:44 AM
I would use some adhesive as well to keep things from rotating.  My experience with switches like that is that they like to back themselves out and get loose. 

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Offline mpeg2

  • Full Member
  • ***
    • Posts: 73
Reply #7 on: February 14, 2023, 11:44:40 AM
Careful with that Switchcraft switch - try to find some specs on it. If I'm not mistaken, it is meant to switch electric guitar pickup level signals - not for switching AC power on/off.

Rich