News:
September 24, 2022, 07:41:31 PM

Author Topic: 7 pin socket fit  (Read 327 times)

0 Members and 1 Guest are viewing this topic.

Offline dthong

  • Newbie
  • *
  • Posts: 4
7 pin socket fit
« on: November 23, 2019, 11:53:10 PM »
Hi

My 7 pin sockets won't fit into the hole on the top-side of the chassis plate. Any issues taking a round file to this?

I also cracked ceramic on the bottom of the 7 pin socket. Will this cause any issues? (I've super-glued it back together for now).

Thanks
Dennis

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 17336
Re: 7 pin socket fit
« Reply #1 on: November 24, 2019, 05:55:56 AM »
Filing the hole a little bit is no problem.  I have notice occasionally that the bottom wafer on some of those ceramic sockets isn't quite round, and it can be a bit difficult to fit them in the holes.  The superglue solution shouldn't cause any problems. 
Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man