News: Trouble logging in? Log in from the login page.
January 17, 2020, 08:50:40 AM

Author Topic: 2N2222A Transistor and Standoffs  (Read 57 times)

0 Members and 1 Guest are viewing this topic.

Offline Mesz77

  • Jr. Member
  • **
  • Posts: 14
2N2222A Transistor and Standoffs
« on: January 13, 2020, 11:37:37 AM »
Hello all,

Ive run into a bit of a hiccup while adding speedball and a choke to my crack. I completely assembled the speedball boards, but I'm missing one 2N2222A transistor. I'm not sure if I was shipped only one, but knowing myself I most likely lost it. Are there any specifications that I should look for to replace it? Or would any 2N2222A transistor work as a replacement?

Now for the choke, I have yet to buy standoffs for it. Do I need to get nylon standoffs, or would it be okay to get brass or aluminum ones?


Brandon Meszar
PSU

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 11950
Re: 2N2222A Transistor and Standoffs
« Reply #1 on: January 13, 2020, 12:20:31 PM »
Any old 2N2222 will work just fine.  If you have a local electronics shop, an NTE123A is the equivalent part.

For the choke, metal standoffs will be stronger.
Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man