Voltage Check on 220VAC

fofo16 · 1200

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline fofo16

  • Newbie
  • *
    • Posts: 7
on: July 11, 2020, 12:59:25 PM
hello

my country voltages/frequencies  220V , 60 Hz

how can i put the Voltage Check on 220VAC ?

sorry for my english


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19757
Reply #1 on: July 11, 2020, 01:06:32 PM
I am not quite certain what you are asking.  The Crack manual gives instructions for wiring for 220V on page 26.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline fofo16

  • Newbie
  • *
    • Posts: 7
Reply #2 on: July 13, 2020, 05:13:00 PM
Quote from: Paul Birkeland on July 11, 2020, 01:06:32 PM
I am not quite certain what you are asking.  The Crack manual gives instructions for wiring for 220V on page 26.
I want to set the Voltage of the crack on 220v
How can I do it ?


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19757
Reply #3 on: July 13, 2020, 05:14:40 PM
When you build the Crack, the instructions on page 26 provide that information.

If you have an old Crack with the old power transformer, this is not an option.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Pages: 1   Go Up
« previous next »