News:
November 26, 2021, 03:58:05 PM

Author Topic: Using 1.0 Speedball on 1.1 Crack, slightly high O readings  (Read 135 times)

0 Members and 1 Guest are viewing this topic.

Offline Jimb0

  • Sr. Member
  • ****
  • Posts: 274
Using 1.0 Speedball on 1.1 Crack, slightly high O readings
« on: August 15, 2020, 08:05:56 AM »
hi PB. Just finished building a crack. Using Speedball 1.0. All checked out normal except for the O readings on the big board. Got 116v/120v. Guessing its the tube so I will try more in a few minutes.

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 15804
Re: Using 1.0 Speedball on 1.1 Crack, slightly high O readings
« Reply #1 on: August 15, 2020, 08:06:24 AM »
What are the voltages on the small board?
Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man