Finished my first build

acrockett55 · 1859

0 Members and 1 Guest are viewing this topic.

Offline acrockett55

  • Jr. Member
  • **
    • Posts: 14
on: February 23, 2021, 12:58:25 PM
Finished my first build and it took me about a week. Worked an hour or two a night and loved every minute of it. I need to finish the base but besides that I will be plugging it in tonight and listening. Of course I need to finish the base. One question
I want to get some better feet for this kit, maybe brass, does anyone have any recommendations?
Next up the S.E.X. kit



Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19319
Reply #1 on: February 23, 2021, 12:59:42 PM
That looks classy.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Deke609

  • Guest
Reply #2 on: February 23, 2021, 01:25:30 PM
Ditto.

For brass feet, check out Lee Valley: http://www.leevalley.com/en-us/shop/hardware/box-hardware/feet

cheers, Derek



Offline johnsonad

  • Hero Member
  • *****
    • Posts: 1670
Reply #3 on: February 23, 2021, 04:13:15 PM
It looks great! Nice job!

Aaron Johnson


Offline Karl5150

  • Sr. Member
  • ****
    • Posts: 618
Reply #4 on: February 24, 2021, 02:59:11 AM
Very nice build, inside and out. Derek's link makes me question my furniture button plugs as feet.
Karl

Karl
Downstairs: Planar3>PH-16>Stereomour II>OB Betsy+
Upstairs: RP1>Eros/CD5004>Seductor (2x Monoblocks)>FH3
Office: Modi Uber 2/Sirius>SEX2.1.1>µFonken FF85WK + DC160 subs
BR: FiiO M6>SEX3.0.1>ScanSpeak 10F + TangBand W6 (Mono)/DT770Pro
Garage: X12 streamer>Quicksand>Minimus 77


Offline patrick620

  • Jr. Member
  • **
    • Posts: 29
Reply #5 on: February 24, 2021, 08:02:02 AM
Looks great. My customer originally wanted green hammer tone but we decided to leave the chassis as is. Welp, after seeing your post we decided that we DO want the hammer tone. Thankfully I only have to dismount the mechanical parts and never got started on the wiring. Close call. I guess my laziness paid off in this case ;) Now him and I are going to have to discuss the finish for the base.
« Last Edit: February 24, 2021, 08:10:41 AM by patrick620 »



Offline acrockett55

  • Jr. Member
  • **
    • Posts: 14
Reply #6 on: February 25, 2021, 03:37:29 AM
Looks great. My customer originally wanted green hammer tone but we decided to leave the chassis as is. Welp, after seeing your post we decided that we DO want the hammer tone. Thankfully I only have to dismount the mechanical parts and never got started on the wiring. Close call. I guess my laziness paid off in this case ;) Now him and I are going to have to discuss the finish for the base.
This is great, glad I could help!!



Offline patrick620

  • Jr. Member
  • **
    • Posts: 29
Reply #7 on: March 03, 2021, 03:50:22 PM
Regarding the paint. I used Rust-Oleum Hammerred. After a week of it sitting waiting on me to get back to it it still seemed just a "hair" tacky and was still putting out some VOC. An hour in the oven at 170 F. and all is much better. Did you have any issues like that?



Offline acrockett55

  • Jr. Member
  • **
    • Posts: 14
Reply #8 on: March 03, 2021, 04:20:00 PM
Regarding the paint. I used Rust-Oleum Hammerred. After a week of it sitting waiting on me to get back to it it still seemed just a "hair" tacky and was still putting out some VOC. An hour in the oven at 170 F. and all is much better. Did you have any issues like that?
I did not, mine was completely dry after 48 hours. I waited 3 days but I had no problems with it drying. It was in my basement that is around 55F for 3 days with my humidifier on.