News:
May 08, 2021, 07:16:37 AM

Author Topic: Eros-2: I built it my way  (Read 412 times)

0 Members and 1 Guest are viewing this topic.

Offline georgeged

  • Jr. Member
  • **
  • Posts: 15
Re: Eros-2: I built it my way
« Reply #15 on: March 04, 2021, 06:38:30 AM »
27K resistor: AMTRANS have Metal Oxide and Carbon Films. Most probably you recommend Metal Oxide ones, correct? If yes, what about Panasonic ERG-2 (2 watt)? I used them in DIY Nelson Pass amps - they are pretty good and small size too.
Giorgi

Online Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 14907
Re: Eros-2: I built it my way
« Reply #16 on: March 04, 2021, 07:04:47 AM »
I would go for the carbon film.  We will use metal oxide resistors in our products where they don't handle signal current (mostly R2 on C4S boards) or where there may not be other good choices (sometimes for really low value/high power filament dropping resistors).  Since there's a big cap across the 27K resistors, I wouldn't be too concerned about using a metal oxide resistor there, but technically I would consider it a downgrade from the parts we provide. 
Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline georgeged

  • Jr. Member
  • **
  • Posts: 15
Re: Eros-2: I built it my way
« Reply #17 on: March 04, 2021, 08:17:24 AM »
Thanks Paul
Giorgi

Offline canonken

  • Jr. Member
  • **
  • Posts: 48
Re: Eros-2: I built it my way
« Reply #18 on: April 24, 2021, 09:29:17 AM »
All I can say is that LOOKS amazing!  Very pretty!