News:
September 30, 2022, 01:25:27 PM

Author Topic: Integration resistor question  (Read 543 times)

0 Members and 1 Guest are viewing this topic.

Offline Neuronal

  • Full Member
  • ***
  • Posts: 118
    • Datta Lab Website
Integration resistor question
« on: July 31, 2021, 11:59:39 AM »
Hi all - I’m building the integration upgrade and was wondering what the wattage was on the 49.9 Ohm and 237 Ohm resistors? 1/8W and 1/4W respectively? The wattage isn’t in my version of the manual. Thanks in advance - Bob
« Last Edit: July 31, 2021, 12:01:18 PM by Neuronal »
Bob D
Rega P2, Cosecant DAC, Reduction, EFP III, Paramount V1.0 + soft start, Omega CAMs + DeepHemp 8s

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 17356
Re: Integration resistor question
« Reply #1 on: July 31, 2021, 02:40:48 PM »
The 237 ohm resistors need to be at least 0.007W and the 49.9 ohm resistors need to be at least 0.04W. 
Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline Neuronal

  • Full Member
  • ***
  • Posts: 118
    • Datta Lab Website
Re: Integration resistor question
« Reply #2 on: August 01, 2021, 12:46:05 PM »
Cool, thanks!
Bob D
Rega P2, Cosecant DAC, Reduction, EFP III, Paramount V1.0 + soft start, Omega CAMs + DeepHemp 8s