No Audio from left speaker. [resolved]

adeep42 · 1711

« previous next »
Pages: 1   Go Down

0 Members and 1 Guest are viewing this topic.

Offline adeep42

  • Full Member
  • ***
    • Posts: 212
on: March 26, 2022, 11:59:34 AM
Just finished my first Bottlehead project I some time. Looks great, right channel sounds great, but!

What part of the balance pot should I be looking at?

Thanks,

A
« Last Edit: March 27, 2022, 12:19:55 PM by Paul Birkeland »


Offline adeep42

  • Full Member
  • ***
    • Posts: 212
Reply #1 on: March 26, 2022, 12:01:17 PM
PS. Just saw my old signature. I better redo it. Neither of my systems looks like that anymore.


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19751
Reply #2 on: March 26, 2022, 12:36:54 PM
I would just start by posting build photos.  When we have run into this with the Moreplay, it is usually a simple miswire.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline adeep42

  • Full Member
  • ***
    • Posts: 212
Reply #3 on: March 27, 2022, 09:31:16 AM
Hi Paul just took these pix. Looking forward to your thoughts.



Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19751
Reply #4 on: March 27, 2022, 09:53:42 AM
I think you have a solder bridge on one of the output jacks.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline adeep42

  • Full Member
  • ***
    • Posts: 212
Reply #5 on: March 27, 2022, 10:44:42 AM
Thank you Paul. That was absolutely brilliant!!!!!!!!!!!!

It's actually sounding great even with no break-in. The 6V6s make some horrible noise on warm up. Then it stops and the noise floor is nonexistent.

I can't imagine that the BeePre can be that much better.


Pages: 1   Go Up
« previous next »