Kit Arrived

CORedhawk · 2585

0 Members and 1 Guest are viewing this topic.

Offline CORedhawk

  • Jr. Member
  • **
    • Posts: 36
on: April 11, 2022, 09:09:16 AM
My C2A arrived last Friday. Haven't had time to do much but as you can see I did paint the chasis and just finished glueing the base. The chasis is finished with Hammered Copper. Think it turned out well. I'll probably finish the base with Tried and True as many have suggested - just leaving it natural. This is litterally the only part of the project I'm comfortable with.  ;D On to the exciting part once the chasis has cured.



Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9621
    • Bottlehead
Reply #1 on: April 11, 2022, 10:19:35 AM
Off to a great start!

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.


Offline Thermioniclife

  • Sr. Member
  • ****
    • Posts: 788
Reply #2 on: April 11, 2022, 11:56:28 AM
Color looks nice. If you used Rustoleum hammered finish let it cure for at least a week before you start the build. The problem is that if you use the base as a build fixture it will leave lines on the painted surface until it cures fully. I generally wait a week then build on a towel.
Use the wait time to read and re read the instructions.
Just my .02 cents. Enjoy.

Lee R.


Offline CORedhawk

  • Jr. Member
  • **
    • Posts: 36
Reply #3 on: April 11, 2022, 01:26:37 PM
Yes, that is the finished I used. I plan on waiting a couple of weeks before starting so hopefully I'll be good. Thanks!



Offline CORedhawk

  • Jr. Member
  • **
    • Posts: 36
Reply #4 on: April 26, 2022, 08:54:56 AM
Progress to date. Think it looks pretty good. Now for the hard part...



Offline kGlerup

  • Jr. Member
  • **
    • Posts: 26
Reply #5 on: April 26, 2022, 07:38:40 PM
I REALLY like that finish.
That build will end looking amazing  8)



Offline CORedhawk

  • Jr. Member
  • **
    • Posts: 36
Reply #6 on: April 27, 2022, 03:10:51 AM
I REALLY like that finish.
That build will end looking amazing  8)
  Thank you!