News:
October 05, 2022, 04:38:55 AM

Author Topic: 13 ohm 1/4W resistor  (Read 123 times)

0 Members and 1 Guest are viewing this topic.

Offline CORedhawk

  • Jr. Member
  • **
  • Posts: 36
13 ohm 1/4W resistor
« on: May 10, 2022, 11:59:20 AM »
Page 46 instructs the insertion of a 13 ohm resistor (brown, orange, black, gold, brown) into the R1 position on the A side of the board. I found two resistors that measure 13 ohms but the colors are (brown, orange, black, gold). I assmre this is correct because it measures correctly and I don't see any other resistors with brown, orange, black, gold, brown) in the components. Am I correct? Thanks!

Online Doc B.

  • Administrator
  • Hero Member
  • *****
  • Posts: 9146
    • Bottlehead
Re: 13 ohm 1/4W resistor
« Reply #1 on: May 10, 2022, 12:02:45 PM »
If it measures right, it is right. That last color band is just a tolerance indicator and we often have to substitute parts these days.
Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.

Offline CORedhawk

  • Jr. Member
  • **
  • Posts: 36
Re: 13 ohm 1/4W resistor
« Reply #2 on: May 10, 2022, 01:04:35 PM »
Thank you