August 19, 2022, 07:29:23 AM

Author Topic: PC 3 Plate Choke needs Re Coating.  (Read 290 times)

0 Members and 1 Guest are viewing this topic.

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 17163
Re: PC 3 Plate Choke needs Re Coating.
« Reply #15 on: June 25, 2022, 05:46:03 AM »
The PC-3 chokes are varnished as part of the manufacturing process.  You can lightly sand on any globs of varnish on the outside, but be sure to paint them if you do that just to be sure they remain protected.
Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man