Forgot about how good it can be!

ALL212 · 1746

0 Members and 1 Guest are viewing this topic.

Offline ALL212

  • Sr. Member
  • ****
    • Posts: 542
on: December 08, 2022, 01:23:41 PM
I forgot... It's been a busy summer and I've let the systems just rest. 
I stream Roon to a micro PC running Roon Bridge.  From there USB to a small Schiit Modi Dac and out to the good stuff.  In spite of appearances the headphone amp is just a Crack with Speedball.  That combination with the Sennheiser HD650 is still magical.




Aaron Luebke


Offline larcenasb

  • Full Member
  • ***
    • Posts: 160
Reply #1 on: December 08, 2022, 07:33:17 PM
Hey again! Always loved the customization of your builds. And yeah, the natural tone and present mids of that combo really is magical. I love acoustic music, especially, with that combo. Happy listening and happy holidays!

Lowell B.


Offline Bourney

  • Jr. Member
  • **
    • Posts: 28
Reply #2 on: December 09, 2022, 02:30:02 PM
Nice variation on the crack. I'm going to guess there's a Goldpoint under there, based on that volume knob?

Love the aged look (I'm guessing genuine age) and the worn/rounded edges on the base.



Offline sl-15

  • Full Member
  • ***
    • Posts: 212
Reply #3 on: December 09, 2022, 03:11:35 PM
Thanks for this, I now just dug up my Crack too. Have not listened to it in ages. Still have the speedball to install too.

Stefan Hampel
Soundsmith Carmen, modded Technics SL-1200mkII, Thorens TD 125 mk2 with SME V, Eros, Extended Foreplay III, BeePre2, Crack, Pioneer Spec 4, Sonus Faber Electa


Offline ALL212

  • Sr. Member
  • ****
    • Posts: 542
Reply #4 on: December 09, 2022, 05:36:18 PM
Nice variation on the crack. I'm going to guess there's a Goldpoint under there, based on that volume knob?

Love the aged look (I'm guessing genuine age) and the worn/rounded edges on the base.

Good eyes!  But I used a goldpoint knob on a Alps pot just to fool you.  I've settled on a black plate with copper bits as a standard now.  My brother built the base for me and I rounded things off to give it a bit of an aged look.  One goal was to angle the plate a bit.


Aaron Luebke