As seen on eBay - a $70k battery tube "amp"

Dr. Toobz · 3714

0 Members and 1 Guest are viewing this topic.


Offline Doc B.

  • Administrator
  • Hero Member
  • *****
    • Posts: 9659
    • Bottlehead
Reply #1 on: June 29, 2013, 09:12:24 AM
Looks to me like the price is high in order to recover the cost of the elegant cabinet.

Dan "Doc B." Schmalle
President For Life
Bottlehead Corp.


Offline Grainger49

  • Hero Member
  • *****
    • Posts: 7175
Reply #2 on: June 29, 2013, 10:53:50 AM
Oooo, Dan you need that tongue-in-cheek smiley face. 

I fear it might look obscene. 



Offline John EH

  • Sr. Member
  • ****
    • Posts: 358
Reply #3 on: June 29, 2013, 12:59:57 PM
Yeah but it comes with a cable too! :)

Smiley face for Grainger.



Offline 2wo

  • Hero Member
  • *****
    • Posts: 1261
  • Test
Reply #4 on: June 29, 2013, 04:08:58 PM
And free shipping...John

John S.


Offline Wanderer

  • Full Member
  • ***
    • Posts: 210
Reply #5 on: June 30, 2013, 02:48:37 AM
Any ideas on how/if this thing might work?

Looks two tubes, jacks and a battery. With no DC blocking cap I can't imagine running 12 volts into the voice coil of one's HD 600/650 is going to do them any good.   

My guess is this is a gag of some sort. ...that said - If I thought I could make these up and sell just two of them a year at the "Buy It Now" price I would happliy retire from my "day job".   

Kevin R-M


Offline Grainger49

  • Hero Member
  • *****
    • Posts: 7175
Reply #6 on: June 30, 2013, 03:34:21 AM
I'll go with gag.  Maybe a shill for the site he mentions?



Offline Dr. Toobz

  • Sr. Member
  • ****
    • Posts: 432
Reply #7 on: June 30, 2013, 04:36:45 AM
I sure hope so, given the lack of output coupling! Moreover, I wasn't aware that these "space charge" tubes had a particularly low plate impedance, given that they run at such a low voltage and puny currents. So, I am at a loss as to how a 150 ohm to 600 ohm device could just be "connected" without having a huge impedance mismatch - unless the output is being taken off the cathode. Even then, a cathode follower's output impedance is the inverse of its transconductance - which these little tubes cant have much of!

This thing has been listed for months, by the way - I just ran across it again recently and thought I'd share a laugh. So, there's a listing fee being paid over and over again for some reason or other....




Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19757
Reply #8 on: June 30, 2013, 07:16:24 AM
I am 99.9% sure it's intended to be humorous (it made me laugh, especially when reading the description).

-PB

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Offline coca

  • Full Member
  • ***
    • Posts: 141
Reply #9 on: June 30, 2013, 09:54:22 AM
I'm so greatful the shipping is free.

Bernie.



Offline dubiousmike

  • Full Member
  • ***
    • Posts: 130
Reply #10 on: July 03, 2013, 08:45:11 AM
Too funny!  It would actually be pretty cool to have as an art piece, provided there was a $69.9k price reduction. 
« Last Edit: July 03, 2013, 11:11:52 AM by dubiousmike »

Mike M.


Offline Downhome Upstate

  • Sr. Member
  • ****
    • Posts: 289
Reply #11 on: July 03, 2013, 10:03:33 AM
Just the thing to help jump-start the Greek economy.

"Too soon old;
   Too late schmart"

    The late Mr. Fox, Fox's Deli, Rochester, NY

Mike P.


4krow

  • Guest
Reply #12 on: July 03, 2013, 10:14:38 AM
  As Maxwell Smart used to say,"I missed it by THAT much." "Ninety nine, let's discuss this in the 'dome of silence' if you get my drift." Actually, he never said that.



Offline Roger

  • Jr. Member
  • **
    • Posts: 44
Reply #13 on: July 04, 2013, 09:37:57 AM
Looks to me like the price is high in order to recover the cost of the elegant cabinet.

 ;D
Roger

Roger
VPI Classic (record player), Trigon advance (RIAA), Electrocompaniet EMC1-up (CD-player), BorderPatrol (line), Paramount v1.1 2A3 (power), Avantgarde Acoustics Duo Grosso (speakers)


Offline earwaxxer

  • Hero Member
  • *****
    • Posts: 1336
Reply #14 on: July 04, 2013, 09:46:09 AM
I'm Greg could design one for half that! With a cigar box chassis to boot!

Eric
Emotiva XPA-2, Magnepan MMG (mod), Quickie (mod), JRiver, Wyrd4sound uLink, Schiit Gungnir, JPS Digital power cord, MIT power cord, JPS Labs ultraconductor wire throughout, HSU sub. powered by Crown.