Transformer for Foreplay II

Cary · 4611

0 Members and 1 Guest are viewing this topic.

Offline Cary

  • Full Member
  • ***
    • Posts: 219
on: July 14, 2013, 08:06:32 AM
Hello,

I need a transformer for my Foreplay II. What are my options, does Hammond or Allied make one? If so what is the product #?

Thank you,

Cary Chin



Offline galyons

  • Sr. Member
  • ****
    • Posts: 626
  • Geary Lyons
Reply #1 on: July 14, 2013, 08:30:03 AM
Allied Electronics  model 6K27VF is an exact replacement.
TRANSFORMER, PRI:110-120V, 60HZ, 125VCT@15DCMA, 6.3V @.6a

http://www.alliedelec.com/search/productdetail.aspx?sku=70009000 

Allied Electronics  model 6K1VF is an "upgraded current" replacement.  May allow for some tube rolling variations not possible with the  original.
TRANSFORMER, PRI: 110-120V: 60HZ, 250VCT@25DCMA, 6.3V @1.0A

http://www.alliedelec.com/search/productdetail.aspx?SKU=70008994


Cheers,
Geary






VPI TNT IV/JMW 3D 12+Benz LP-S>  Eros + Auralic Aries + ANK Dac 4.1 >Eros TH+ Otari MX5050 IIIB2 > BeePre >Paramount 300B 7N7 > EV Sentry IV-A

Thorens TD124/Ortofon RMG-212/SPU >Seduction > Smash^Up> Paramour 45 MQ >K12's


Offline Natural Sound

  • Sr. Member
  • ****
    • Posts: 998
Reply #2 on: July 14, 2013, 09:14:16 AM
Allied Electronics  model 6K27VF is an exact replacement.
TRANSFORMER, PRI:110-120V, 60HZ, 125VCT@15DCMA, 6.3V @.6a

http://www.alliedelec.com/search/productdetail.aspx?sku=70009000 

Allied Electronics  model 6K1VF is an "upgraded current" replacement.  May allow for some tube rolling variations not possible with the  original.
TRANSFORMER, PRI: 110-120V: 60HZ, 250VCT@25DCMA, 6.3V @1.0A

http://www.alliedelec.com/search/productdetail.aspx?SKU=70008994


Cheers,
Geary

Are you sure? The secondary voltages are different, 125VCT vs. 250VCT



Offline galyons

  • Sr. Member
  • ****
    • Posts: 626
  • Geary Lyons
Reply #3 on: July 14, 2013, 09:24:43 AM
Allied Electronics  model 6K27VF is an exact replacement.
TRANSFORMER, PRI:110-120V, 60HZ, 125VCT@15DCMA, 6.3V @.6a

http://www.alliedelec.com/search/productdetail.aspx?sku=70009000 

Allied Electronics  model 6K1VF is an "upgraded current" replacement.  May allow for some tube rolling variations not possible with the  original.
TRANSFORMER, PRI: 110-120V: 60HZ, 250VCT@25DCMA, 6.3V @1.0A

http://www.alliedelec.com/search/productdetail.aspx?SKU=70008994


Cheers,
Geary

Are you sure? The secondary voltages are different, 125VCT vs. 250VCT

Yes, the 6K1VF will give more B+ and filament current to work with so you try tubes such as the 12BH7.

Cheers,
Geary

VPI TNT IV/JMW 3D 12+Benz LP-S>  Eros + Auralic Aries + ANK Dac 4.1 >Eros TH+ Otari MX5050 IIIB2 > BeePre >Paramount 300B 7N7 > EV Sentry IV-A

Thorens TD124/Ortofon RMG-212/SPU >Seduction > Smash^Up> Paramour 45 MQ >K12's


Online Paul Joppa

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 5833
Reply #4 on: July 14, 2013, 10:44:41 AM
The Foreplay has a long history; hopefully the following will help clarify some parts:

Foreplay I used a 12.6vAC heater supply, and a 125v HV winding with a full-wave bridge rectifier (four diodes).

Foreplay II used a 6.3vAC heater winding, and a 125v HV winding with a full-wave bridge rectifier (four diodes).

Seduction used the PT-1, which was also used by some eXperimenters to upgrade their Foreplays. That transformer has a 6.3vDC heater supply, and a 250vCT HV winding, using a full-wave CT rectifier (two diodes).

Foreplay III used the PT-3 with a 6.3vDC heater supply and dual, paralleled 160v HV windings, which used a voltage doubler to obtain a high voltage which was regulated to 150v with a gas regulator (0D3).

Extended Foreplay used the PT-3 with 6.3vDC heater supply, and the dual 160v windings fed dual-mono fullwave bridge rectifiers (four diodes per channel).

Paul Joppa


Offline Cary

  • Full Member
  • ***
    • Posts: 219
Reply #5 on: July 15, 2013, 05:26:06 AM
Thank Paul and everyone, I will be ordering an Allied 6K27VF for my Foreplay II.

Cary
Bottlehead Ambassador