How Bad...

booangler · 5884

0 Members and 1 Guest are viewing this topic.

Offline booangler

  • Full Member
  • ***
    • Posts: 76
  • My first love! Not Me... Fishing!!!
on: September 30, 2013, 04:01:07 AM
... Will the seduction sound if I use 10% capacitors in place of the 5% .033 capacitors in the RIAA Section? Seems that I lost one of the originals while waiting for two replacement resistors to arrive. Didn't loose those just installed them in the wrong location. I should remember to stop working once I get past the point of tired.

And yes my kit has been sitting around for a while, and now I want it finished yesterday!

Thanks,

Alan

The joy of music should never be interrupted by a commercial - Leonard Bernstein

Denon POA | PJCCS Quickie | Hagerman Bugle | SOTA Sapphire w/ Grado Gold | B&W 602


Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
    • Posts: 19750
Reply #1 on: September 30, 2013, 04:09:51 AM
My suggestion is to buy ten and measure out a close pair.

Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man


Offline booangler

  • Full Member
  • ***
    • Posts: 76
  • My first love! Not Me... Fishing!!!
Reply #2 on: September 30, 2013, 05:15:34 AM
Thank you Paul.

I decide to clean up my work bench, and do you know what I found??

Yup the missing cap. it had made its way under and behind my lcd monitor. Little Bastard.

Cheers,

Alan

The joy of music should never be interrupted by a commercial - Leonard Bernstein

Denon POA | PJCCS Quickie | Hagerman Bugle | SOTA Sapphire w/ Grado Gold | B&W 602


Offline Grainger49

  • Hero Member
  • *****
    • Posts: 7175
Reply #3 on: September 30, 2013, 06:00:10 AM
That is what I was going to say.  The parts are inexpensive. 

You can also match the right and left channels to the last digit on your meter.