News: Trouble logging in? Log in from the login page.
April 04, 2020, 08:01:16 AM

Author Topic: Iron C4S instructions for SeX kit  (Read 16624 times)

0 Members and 3 Guests are viewing this topic.

Offline wylymon

  • Jr. Member
  • **
  • Posts: 36
Re: Iron C4S instructions for SeX kit
« Reply #15 on: September 17, 2014, 12:31:02 PM »
Finally getting around to adding the iron/ cap upgrade to my Sex 2.0. The  URL posted no longer works. Please update.
Best regards, James
James Wyly

Offline fullheadofnothing

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1437
  • A noble spirit embiggens the smallest man
Joshua Harris

I Write the Manuals That Make The Whole World Sing
Kit Packer Emeritus

Offline wylymon

  • Jr. Member
  • **
  • Posts: 36
Re: Iron C4S instructions for SeX kit
« Reply #17 on: September 17, 2014, 03:15:01 PM »
Thank you Joshua!
James Wyly

Offline rchristie

  • Newbie
  • *
  • Posts: 5
Re: Iron C4S instructions for SeX kit
« Reply #18 on: April 25, 2015, 09:22:23 AM »
Hello,
It's slightly embarrassing, but I'm just now getting around to installing the C4S boards I ordered in 2008 into my SEX kit.  Is there a link to the installation instructions that works?  Even the wayback machine seems to have lost the thread at this point.

Thanks,
Rich
Rich Christie

Offline DDDamian

  • Jr. Member
  • **
  • Posts: 23
Re: Iron C4S instructions for SeX kit
« Reply #19 on: May 10, 2015, 03:16:50 PM »
Hopefully someone can help Rich above, and I'll give another necro-bump to this thread:

If just replacing the iron on a SEX 2.0 which already has the C4S upgrade do I still need to source 2µF parafeed caps? Or am I just swapping the iron? Plan on ordering the iron and don't want to be left without my favourite amp for a couple of caps :)

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 12304
Re: Iron C4S instructions for SeX kit
« Reply #20 on: May 10, 2015, 03:40:53 PM »
Yes, you will want some 2uF caps as well.

-PB
Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline DDDamian

  • Jr. Member
  • **
  • Posts: 23
Re: Iron C4S instructions for SeX kit
« Reply #21 on: May 11, 2015, 03:03:01 PM »
Yes, you will want some 2uF caps as well.

-PB

Cheers PB!