News:
September 28, 2023, 06:05:13 PM
« previous next »
Pages: [1]   Go Down

Author Topic: Dimension checks  (Read 1990 times)

0 Members and 1 Guest are viewing this topic.

Offline mpeg2

  • Full Member
  • ***
  • Posts: 72
Dimension checks
« on: April 23, 2014, 06:22:51 AM »
I've pre-ordered a Smash kit. I plan to make a base & turn some knobs in the time between now & when it ships.

If I read correctly, the plate is 10" x 10" - correct?

Can someone tell me the diameter of the pot shafts?

Thanks,
   Rich
Logged

Offline Paul Birkeland

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 18679
Re: Dimension checks
« Reply #1 on: April 23, 2014, 06:24:50 AM »
Yes, the base plate is indeed a 10x10.

The pot shafts are 1/4".

Have fun making the knobs!
Logged
Paul "PB" Birkeland

Bottlehead Grunt & The Repro Man

Offline mpeg2

  • Full Member
  • ***
  • Posts: 72
Re: Dimension checks
« Reply #2 on: April 23, 2014, 06:32:46 AM »
Thanks.

Lathes are fun, you just hold the tools or sandpaper & the lathe does all the work.

Did a set for my Stereomour - turned out quite nice.

   Rich
Logged

Offline xcortes

  • Sr. Member
  • ****
  • Posts: 997
Re: Dimension checks
« Reply #3 on: April 23, 2014, 07:49:22 AM »
"Lathes are fun, you just hold the tools or sandpaper & the lathe does all the work."

I don't think that my friend that builds 1.2 meter diameter horns in his self built lathe agrees!
Logged
Xavier Cortes
Pages: [1]   Go Up
« previous next »